Pure Sound A10 Integrated Amplifier Integrated

Pure Sound A10 Integrated Amplifier

  • Product Code: A10
  • £729.95

The A10 was developed to meet the need for a compact and relatively affordable Class A amplifier that would be compatible with high quality, high sensitivity loudspeakers.

The A10 is a line level intergrated design that allows for the selection of 2 different source components and control of the volume via a high quality film potentiometer.

Class A was chosen because it gives lower distortion and a more relaxing, natural souns.

The A10 uses the 6P14 output valves (an equivalent of the EL84/6BQ5) in an ultra linier push pull configuration. This arrangement gives a combination of power and clarity the is difficult to beat. There is a charming quality about the way this family of pentodes reproduce music.

The A10 uses an Auto Bias system, which means the replacment output valves should be fitted as matched pairs so there will be no need to reset or monitor bias conditions.

Very high quality components are used throughout uncluding selected carbon film resistors and polypropylene signal coupling capacitors. All the input sockets and speaker terminals are gold plated to ensure good quality electrical contact in the long term.

The ouput can be configured for use with 4 or 8 Ohm loudspeakers.

A10 Features:

Ultra Linear push pull output stage using 6P14's in Class A.

Wide band output transformers using Z11 silicon laminations and 6N copper wire.

Japanese Rubycon power supply capacitors.

Evox Rifa signal coupling capacitors.

Carbon film restors.

ALPS volume potentiometer.

24K gold plated phono sockets and speaker terminals.

30mm Sandalwood fascia panel.

24K gold plated brass control knob.

 

Amplifiers
Frequency Response 30Hz - 60kHz
Output Power (8 Ohms) 18 Watts per channel
Inputs 2 x RCA (Single Ended)
Outputs 4 & 8 Ohms speaker taps
Dimensions (H x W x D) 140mm x 230mm x 330mm
Weight 8.50 KG

3 Year Warranty (6 Months on valves) - Terms and Conditions Apply

At Audio Destination we use various delivery methods to suit various needs from standard Royal Mail services (1st Class,Recorded or Special Delivery) to a fully insured courier service (one we have used for many years) depending on size,weight and cost of item.

Postage costs will show at checkout.

One thing customers can rely upon is Audio Destination will do whatever we can to get the item you have purchased to you as quickly as possible but again we will inform you if there are likely to be any delays.

Should any problems arise or any special request need to be catered for then please call us on 01884 243584 (and ask for Mike or Caroline) or leave a message in the comments section when ordering and this way we can make your experience of ordering from Audio Destination as enjoyable as possible.

The A10 was developed to meet the need for a compact and relatively affordable Class A amplifier that would be compatible with high quality, high sensitivity loudspeakers.

The A10 is a line level intergrated design that allows for the selection of 2 different source components and control of the volume via a high quality film potentiometer.

Class A was chosen because it gives lower distortion and a more relaxing, natural souns.

The A10 uses the 6P14 output valves (an equivalent of the EL84/6BQ5) in an ultra linier push pull configuration. This arrangement gives a combination of power and clarity the is difficult to beat. There is a charming quality about the way this family of pentodes reproduce music.

The A10 uses an Auto Bias system, which means the replacment output valves should be fitted as matched pairs so there will be no need to reset or monitor bias conditions.

Very high quality components are used throughout uncluding selected carbon film resistors and polypropylene signal coupling capacitors. All the input sockets and speaker terminals are gold plated to ensure good quality electrical contact in the long term.

The ouput can be configured for use with 4 or 8 Ohm loudspeakers.

A10 Features:

Ultra Linear push pull output stage using 6P14's in Class A.

Wide band output transformers using Z11 silicon laminations and 6N copper wire.

Japanese Rubycon power supply capacitors.

Evox Rifa signal coupling capacitors.

Carbon film restors.

ALPS volume potentiometer.

24K gold plated phono sockets and speaker terminals.

30mm Sandalwood fascia panel.

24K gold plated brass control knob.

 

Amplifiers
Frequency Response 30Hz - 60kHz
Output Power (8 Ohms) 18 Watts per channel
Inputs 2 x RCA (Single Ended)
Outputs 4 & 8 Ohms speaker taps
Dimensions (H x W x D) 140mm x 230mm x 330mm
Weight 8.50 KG

3 Year Warranty (6 Months on valves) - Terms and Conditions Apply

At Audio Destination we use various delivery methods to suit various needs from standard Royal Mail services (1st Class,Recorded or Special Delivery) to a fully insured courier service (one we have used for many years) depending on size,weight and cost of item.

Postage costs will show at checkout.

One thing customers can rely upon is Audio Destination will do whatever we can to get the item you have purchased to you as quickly as possible but again we will inform you if there are likely to be any delays.

Should any problems arise or any special request need to be catered for then please call us on 01884 243584 (and ask for Mike or Caroline) or leave a message in the comments section when ordering and this way we can make your experience of ordering from Audio Destination as enjoyable as possible.

Related Products