PS Audio Stellar S300 Stereo Power Amplifier  Stereo Power

PS Audio Stellar S300 Stereo Power Amplifier

  • Product Code: S300
  • £1,500.00
  • £1,275.00

Please Note: We can only ship this item within the UK Only.

The PS Audio Stellar S300 stereo power amplifier is a dual mono power amplifier capable of effortlessly driving demanding loudspeaker loads to concert levels. The perfect choice for just about any loudspeaker, the S300 slips into any system, surprising and delighting even the most discriminating Audiophile.

The S300 opens up your musical library in ways you might not have thought possible, revealing nuance and detail covered up by traditional amplifiers. One listen to the Stellar S300 and you’ll know you made the right choice. Effortless, rich, spacious with never a hint of glare or aggression, a joy to hear. An amplifier worthy of the PS Audio name.

Rated at 140 Watts per channel into 8Ω and 300 Watts per channel into 4Ω, the Stellar S300 combines the best of two worlds: ultra linear, high current, Class D technology for the output stage; a discrete, Class A MOSFET based Analog Cell for the all important input stage. The Stellar S300’s rich, warm, and engaging sonic character comes from the Analog Cell. Its powerful, authoritative control over the loudspeaker stems from its high current, ultra low impedance Class D output stage.

PS Audio`s Stellar design imperative was to produce a truly musical sounding power amplifier that proudly competed with any amplifier. Its designer, PS Audio engineer Darren Myers, took the challenge and set to work on a new concept, a hybrid that would combine the best of today’s technology with time honoured techniques leveraging PS Audio’s forty plus years of experience.

The results are extraordinarily musical. Even from the earliest prototype PS Audio knew the Stellar power amplifier series was going to be something special. Stellar amplifiers never draw attention to themselves, a rare quality in amplifiers of any price. After hundreds of hours of tuning, voicing, and perfectionist tweaking, PS Audio were confident the ends justified the means.

Audition the Stellar S300 and you’ll appreciate Myer’s dedication to musical truth without compromise.

The power amplifier is technology always present in stereo systems. Yet, despite the fact everyone uses them, few appreciate the power amplifier`s critical role in preserving music’s nuanced details, because most amplifiers fail to preserve them. Overtones from plucked instruments, subtle cues defining placement, depth, soundstage width, and transient decays are often lost in the power amplifier.

The Stellar S300 loses nothing. Stellar’s lead designer, engineer Darren Myers, was obsessed with its detail and voicing, lavishing great attention on even the tiniest nuances in the music. This helped Stellar capture the rich full bodied essence of recorded music and presents it to your loudspeakers with authority and grace, with never a hint of glare or unnaturalness. The Stellar S300 is faithful to the music like few amplifiers are.

The Analog Cell makes all the difference

The connection between preamplifier and power amplifier is critical, for it is at this junction where most essential musical details are easily lost. Nothing in the design of a power amplifier is more important than its input stage when preserving music’s finest nuances. In the Stellar S300 a unique topology called the Analog Cell has been employed to preserve the rich details found in music.

The Analog Cell is a zero feedback, balanced, Class A, MOSFET input stage. The design closely mirrors the sonic characteristics of a vacuum tube and allows Myers the freedom to voice the amplifier as he sees fit. Long hours of listening and tuning sessions in Music Room One, shared by PS Audio founder Paul McGowan and Darren Myers, resulted in a sonic signature that honours the music and never draws attention to itself.

The listening experience with the Stellar S300 starts feet tapping and smiles breaking out. The Stellar S300 presents music without a hint of glare. Listeners are constantly surprised at the width and depth of the Stellar S300’s soundstage; its preservation of the smallest details in reverb, room acoustics, musical overtones; its commanding presence without intrusion; it’s delicate handling of subtle shadings; its authority as it grabs hold of the loudspeaker and breezes through even the most complex musical passages.

Amplifiers
Frequency Response 10Hz – 20KHz +/- 0.5dB , 10Hz – 50KHz +0.1/-3.0dB
Output Power (8 Ohms) 140 Watts Per Channel
Output Power (4 Ohms) 300 Watts Per Channel
Inputs 1 x RCA (Single Ended), 1 x XLR (Balanced), 1 x 12V Trigger (Mini Jack)
Outputs 1 x 12V Trigger (Mini Jack)
Dimensions (H x W x D) 76mm x 430mm x 305mm (330mm Including Sockets)
Weight 7.00 KG

3 Year Warranty - Terms and Conditions Apply

At Audio Destination we use various delivery methods to suit various needs from standard Royal Mail services (1st Class,Recorded or Special Delivery) to a fully insured courier service (one we have used for many years) depending on size,weight and cost of item.

Postage costs will show at checkout.

One thing customers can rely upon is Audio Destination will do whatever we can to get the item you have purchased to you as quickly as possible but again we will inform you if there are likely to be any delays.

Should any problems arise or any special request need to be catered for then please call us on 01884 243584 (and ask for Mike or Caroline) or leave a message in the comments section when ordering and this way we can make your experience of ordering from Audio Destination as enjoyable as possible.

Please Note: We can only ship this item within the UK Only.

The PS Audio Stellar S300 stereo power amplifier is a dual mono power amplifier capable of effortlessly driving demanding loudspeaker loads to concert levels. The perfect choice for just about any loudspeaker, the S300 slips into any system, surprising and delighting even the most discriminating Audiophile.

The S300 opens up your musical library in ways you might not have thought possible, revealing nuance and detail covered up by traditional amplifiers. One listen to the Stellar S300 and you’ll know you made the right choice. Effortless, rich, spacious with never a hint of glare or aggression, a joy to hear. An amplifier worthy of the PS Audio name.

Rated at 140 Watts per channel into 8Ω and 300 Watts per channel into 4Ω, the Stellar S300 combines the best of two worlds: ultra linear, high current, Class D technology for the output stage; a discrete, Class A MOSFET based Analog Cell for the all important input stage. The Stellar S300’s rich, warm, and engaging sonic character comes from the Analog Cell. Its powerful, authoritative control over the loudspeaker stems from its high current, ultra low impedance Class D output stage.

PS Audio`s Stellar design imperative was to produce a truly musical sounding power amplifier that proudly competed with any amplifier. Its designer, PS Audio engineer Darren Myers, took the challenge and set to work on a new concept, a hybrid that would combine the best of today’s technology with time honoured techniques leveraging PS Audio’s forty plus years of experience.

The results are extraordinarily musical. Even from the earliest prototype PS Audio knew the Stellar power amplifier series was going to be something special. Stellar amplifiers never draw attention to themselves, a rare quality in amplifiers of any price. After hundreds of hours of tuning, voicing, and perfectionist tweaking, PS Audio were confident the ends justified the means.

Audition the Stellar S300 and you’ll appreciate Myer’s dedication to musical truth without compromise.

The power amplifier is technology always present in stereo systems. Yet, despite the fact everyone uses them, few appreciate the power amplifier`s critical role in preserving music’s nuanced details, because most amplifiers fail to preserve them. Overtones from plucked instruments, subtle cues defining placement, depth, soundstage width, and transient decays are often lost in the power amplifier.

The Stellar S300 loses nothing. Stellar’s lead designer, engineer Darren Myers, was obsessed with its detail and voicing, lavishing great attention on even the tiniest nuances in the music. This helped Stellar capture the rich full bodied essence of recorded music and presents it to your loudspeakers with authority and grace, with never a hint of glare or unnaturalness. The Stellar S300 is faithful to the music like few amplifiers are.

The Analog Cell makes all the difference

The connection between preamplifier and power amplifier is critical, for it is at this junction where most essential musical details are easily lost. Nothing in the design of a power amplifier is more important than its input stage when preserving music’s finest nuances. In the Stellar S300 a unique topology called the Analog Cell has been employed to preserve the rich details found in music.

The Analog Cell is a zero feedback, balanced, Class A, MOSFET input stage. The design closely mirrors the sonic characteristics of a vacuum tube and allows Myers the freedom to voice the amplifier as he sees fit. Long hours of listening and tuning sessions in Music Room One, shared by PS Audio founder Paul McGowan and Darren Myers, resulted in a sonic signature that honours the music and never draws attention to itself.

The listening experience with the Stellar S300 starts feet tapping and smiles breaking out. The Stellar S300 presents music without a hint of glare. Listeners are constantly surprised at the width and depth of the Stellar S300’s soundstage; its preservation of the smallest details in reverb, room acoustics, musical overtones; its commanding presence without intrusion; it’s delicate handling of subtle shadings; its authority as it grabs hold of the loudspeaker and breezes through even the most complex musical passages.

Amplifiers
Frequency Response 10Hz – 20KHz +/- 0.5dB , 10Hz – 50KHz +0.1/-3.0dB
Output Power (8 Ohms) 140 Watts Per Channel
Output Power (4 Ohms) 300 Watts Per Channel
Inputs 1 x RCA (Single Ended), 1 x XLR (Balanced), 1 x 12V Trigger (Mini Jack)
Outputs 1 x 12V Trigger (Mini Jack)
Dimensions (H x W x D) 76mm x 430mm x 305mm (330mm Including Sockets)
Weight 7.00 KG

3 Year Warranty - Terms and Conditions Apply

At Audio Destination we use various delivery methods to suit various needs from standard Royal Mail services (1st Class,Recorded or Special Delivery) to a fully insured courier service (one we have used for many years) depending on size,weight and cost of item.

Postage costs will show at checkout.

One thing customers can rely upon is Audio Destination will do whatever we can to get the item you have purchased to you as quickly as possible but again we will inform you if there are likely to be any delays.

Should any problems arise or any special request need to be catered for then please call us on 01884 243584 (and ask for Mike or Caroline) or leave a message in the comments section when ordering and this way we can make your experience of ordering from Audio Destination as enjoyable as possible.

Related Products