ADOT MC02 Dual (Media Converter) Audiophile Optical Fibre Network Kit

ADOT MC02 Dual (Media Converter) Audiophile Optical Fibre Network Kit

ADOT (Audiophile Digital Optical Technology) uses optical fibre to galvanically isolate the data signal between your router and network streaming devices. All connection options are available from devices with traditional RJ/45 (ethernet) LAN connections and for devices that have a direct SFP Fibre LAN input (such as Melco N5 or S100/2).

This clever little (but very important) system converts Copper ethernet (RJ/45) to a optical (fibre) data stream and the difference is far from subtle with a MUCH quiter background giving a much more accurate musical performance. 

The ADOT optical fibre system is available in various options from the starting kit MC01 all the way to the MC04 Plixar PSU. This allows for all types of connections/combinations which are explained below.

ADOT Options For Devices WITH SFP Fibre Input:

MC01: Includes MC01 x 1, SFP x 2, 1.5 metre Fibre x 1, Standard Plug Type PSU 

MC02: Incudes MC01 x 1, SFP x 2, 1.5 metre Fibre x 1, Linear Plug Type PSU 

MC03NP: Includes MC01 x 1, SFP x 2, 1.5 metre Fibre x 1, NuPrime LPS-205 Linear PSU 

MC03Plix: Includes MC01 x 1, SFP x 2, 1.5 metre Fibre x 1, Plixar Elite BDC Linear PSU 

Please Note: The above ADOT MC options are for products that already have a SFP Fibre input (such as Melco N5 or Melco S100/2) so only require a SINGLE ADOT MC Firbe transmitter.

ADOT Options For Devices With NO SFP Fibre Input:

The options listed here for devices with NO SFP input which requires 2 x ADOT MC01 units. These dual kits start from the MC02 Dual listed below which is a complete kit of parts to galvanically isolate your network device.

MC02 Dual: Incudes MC01 x 2, SFP x 2, 1.5 metre Fibre x 1, 1 x Melco CAT 7 Cable, Linear Plug Type PSU, 1 x DC Splitter

For those wanting to increase performance further than the MC02 Dual on devices with NO SFP inputs there are linear Power supply upgrades from NuPrime or Plixar which can be added which make the following kits:

MC03NP Dual: Incudes MC01 x 2, SFP x 2, 1.5 metre Fibre x 1, 1 x Melco CAT 7 Cable, NuPrime Linear PSU, 1 x DC Splitter

MC03Plix Dual: Incudes MC01 x 2, SFP x 2, 1.5 metre Fibre x 1, 1 x Melco CAT 7 Cable, Plixir Linear PSU, 1 x DC Splitter

Fibre cables can be used over long distances meaning that distances of copper etherent (RJ/45) cables to be kept to shortist length possible.

Standard lengths of fibre multi-mode cables can be supplied up to 50 metre long at a reanonable cost.