Sumiko Celebration 40 Low Output Moving Coil Cartridge
-
£3,199.95
Sumiko Celebration 40 Low Output Moving Coil Cartridge
Within this structure, the sophisticated magnet system is housed. The result of this assembly is a solid brass foundation and very wide dynamics alongside a vast open soundstage, a natural and pure midrange, and high frequencies that are extended but never bright. The long-grain Boron cantilever employed in the Celebration 40 provides class-leading energy transfer from the stylus to the coils. Further, the specially devised rubber suspension system is tuned for an optimised acoustic performance and extended cartridge life.
The Sumiko Celebration 40 now implements the same solid, ultra-low-mass 75µm x 2.5µm Microridge stylus as the flagship Palo Santos Presentation. Its prevailing characteristics are rich, smooth and warm, yet it retains a clarity and precision that defies its tonal character. The result is a cartridge listeners can escape into for hours on end without fatigue. The Microridge also tracks like few others are capable, navigating the record groove with ease. Musicality, emotion, bass depth and slam with mid/high sweetness are all on offer, in the truest spirit of Sumiko phono cartridges.
The luxurious Plum wood body, chosen for its ideal resonance characteristics brings refinement to the sound while its angled front panel provides clear line of sight during cartridge installation. After assembly at Sumiko’s long standing Japanese factory, final adjustments are calibrated for your enjoyment. The celebration 40, not only celebrates the many years of Sumiko’s existence, it represents many decades of analogue excellence.
Key Features:
⦁ Luxury moving coil cartridge with a Plum wood body
⦁ Ogura Jewel Co. P9 elliptical stylus mounted on long-grain Boron cantilever
⦁ Sophisticated magnet system for exceptional control
⦁ Unrivalled sonic characteristics at the price
⦁ Overhead mounting design
1 Year Warranty (Terms & Conditions Apply)
Analogue - Cartridges | |
Type | Moving Coil |
Stylus Type | Solid Ultra Low-Mass 75µm x 2.5µm Microridge |
Cantilever System | Boron |
Output Voltage | 0.5mV |
Frequency Range | 10Hz - 50kHz |
Tracking Force Range | 1.9 - 2.2g |
Tracking Force (Recommended) | 2.0g |
Compliance | 12x10-6 cm/dyn @100Hz |
Weight - Cartridge | 7.0g |
Analogue - MC Step Up Transformer | |
Recommended Load Impedance | 100Ω - 1kΩ |