VPI Shyla Dual Moving Coil Cartridge
-
£2,400.00
VPI Shyla Dual Moving Coil Cartridge
Built in Japan by Audio-Technica, Voiced by VPI: Shyla Dual
Moving-Coil Phono Cartridge Plays with High Separation, Wide Responsiveness,
Enticing Presence, and a Natural Midrange
Inspired by Audio-Technica's flagship ART Series, and a
collaboration between the iconic Japanese cartridge manufacturer and the analogue
experts at VPI, the Shyla dual moving-coil cartridge combines expert design and
natural, musical voicing focused on the midrange while also dialed-in to
provide strong, deep lows and detailed highs. Featuring a premium magnetic
core, special line contact stylus, and 0.26mm-diameter solid boron cantilever, the
VPI Shyla proves a fantastic tracker that refuses to lose its composure even
during challenging passages. Once it hits the grooves of an LP this premium,
high-separation, wide-response model reproduces music with enticing presence,
imaging, liveliness, and dynamics.
On the technical side, VPI Shyla boasts all the elements
that have helped make both Audio-Technica and VPI renowned names in the high-end
industry for decades. As such VPI Shyla's coils and terminal pins use PCOCC to
maintain exceptional purity and conductivity. Its neodymium magnet and
permendur yoke significantly increase magnetic energy, while the rated 0.6mV
output speaks to its powerful performance.
Shyla's exterior construction is equally important. Modified
with advanced internal dampening, its mould ensures exceptional stability and
rigidity, limiting unnecessary coil movement and reducing distortion.
Similarly, its machined aluminium/hard plastic hybrid body further lessens
resonance. Last but not least, the presence of threaded holes allows for easy,
hassle-free mounting.
Partnerships between revered high-end companies don't come
better than Audio-Technica and VPI. Hear Shyla and experience why.
5 Year Warranty (Terms & Conditions Apply)
Analogue - Cartridges | |
Type | Dual Moving-Coil Phono Cartridge |
Stylus Type | Nude square shank |
Cantilever System | 0.26 mm diameter solid boron |
Output Voltage | 0.6 mV (1 kHz, 5 cm/sec.) |
Frequency Range | 15-50,000 Hz |
Tracking Force (Recommended) | 1.6-2.0 g (1.8 g standard) |
Recommended Load Impedance | Min. 100 ohms |
Compliance | 15 x 10-6 cm/dyne (100 Hz) |
Vertical Tracking Angle | 23° |
Weight - Cartridge | 9.8 g |