Atacama NeXXus CM Loudspeaker Stand - Pair

Atacama NeXXus CM Loudspeaker Stand - Pair

Looking for speaker stands that both perform and offer the convenience of ample cable management? Then the Atacama NeXXus CM range could be exactly what you are looking for!

Based on the Atacama NeXXus HiFi Audio speaker stand range and with height options of 520mm (20.47”) 620mm (24.4”), 720mm (28.3”) and 1020mm (40.15”), Atacama NeXXus CM features an upgraded rear 50.8mm (2”) tube with large, twin 34mm (1.34”) x 44mm (1.73”) oval cable management holes positioned either end.

As well as being able to accept 30mm (1.18”) diameter speaker cables, those with active speakers will have an opportunity to hide away most standard IEC power cords, interconnects and Wi-Fi cables. 

Offering a higher mass loading capacity than Atacama NeXXus Essential specification, the Atacama NeXXus CM speaker stands also feature a front oversized 76.2mm (3”) vertical tube designed to maximize the capacity for Atacama Atabites or similar inert material.

Gel Pads - NeXXus CM specification are supplied with domed gel pads.

Dimensions

Standard Top plate (Width, Depth) 130mm (5.11”) x 170mm (6.69”)

Base Plate (Width, Depth) 260mm (10.2”) x 365mm (14.37”)

Weight capacity (per stand) 22.5kg (49.06 lbs)

Colour options - Satin Black or Diamond white.

Height options inclusive of spikes:

 NeXXus 500 CM, 520mm (20.47”) high version
 NeXXus 600 CM, 620mm (24.4”) high version
 NeXXus 700 CM, 720mm (28.3”) high version
 NeXXus 1000 CM, 1020mm (40.15”) high version

Optional Extra:

Top plate pack dimensions (Width/Depth) - Supplied in pairs.

 160mm x 220mm (6.29” x 8.66”) Top Plate Pack
 140mm x 210mm (5.5” x 8.26”) Top Plate Pack
 180mm x 150mm (7.08” x 5.9”) Top Plate Pack
 190mm x 305mm (7.48” x 12”) Top Plate Pack

Spike shoes- 2 x packs of Atacama HD-L spike shoes are recommended if the stands are being placed on a delicate floor covering.

Mass Loading Plate pack - This pack is compatible with NeXXus Series.

Maxinum Atabite Capacity:

NeXXus 500 CM - 17.6kg (38.8 lbs) per pair. (2 x 7kg tubs sufficient for most applications)

NeXXus 600 CM - 21.25kg (48.8 lbs) per pair. (2 to 3 x 7kg tubs sufficient for most applications)

NeXXus 700 CM - 24.87kg (54.8 lbs) per pair. (2 to 3 x 7kg tubs sufficient for most applications)

NeXXus 1000 CM - 35.75kg (78.81lbs) per pair. (4 x 7kg tubs sufficient for most applications)

Compatibility with the NeXXus cable management system is dependent on cable types, number of cables, thickness, and pliability of cables that are to be accommodated. Some larger bodied IEC connectors may need to be removed and refitted once the cable has been guided through the cable management tube. If in doubt, check with your speaker cable supplier or Atacama stockist for advice regarding suitability.

Please Note- The 130mm x 170mm top plate pack is included with Nexxus speaker stands as standard. If you require one of the upgraded top plate packs, Atacama suggest that the unused top plates be repurposed by attaching them to the underneath of the base plates via the tube fastening bolts. This will increase the low-down mass of the stands, reduce base plate resonance, increased rigidity and will avoid the original top plates being misplaced should they be required later.

Atacama NeXXus series speaker stands are designed and manufactured in the UK.