• Lyra Kleos Mono Moving Coil Cartridge

Lyra Kleos Mono Moving Coil Cartridge

  • £3,095.00

Finance Available
  • Product Code:  kleos Mono
Unavailable to purchase on site. Call 01884 243 584 or Contact Us for details.

Lyra Kleos Mono Moving Coil Cartridge

Although many MC cartridges have good performance, their sound is held back by how they are designed. The problem is, the signal coils should have the same angle as the magnetic circuit during playback, but MC cartridges are typically designed so that the opposite happens - applying normal tracking force pushes the coils out of alignment. This impairs coil sensitivity and linearity, and reduces sound quality.

Lyra's "New Angle" technology solves this fundamental problem by compensating for how the signal coils are affected by vertical tracking forces, and optimally aligning the coils when it matters most - during playback. Introduced on our entry-level Lyra Delos, the New Angle technology enables the Lyra Delos to perform well above its pricepoint.

On mono records, the vertical axis of the groove contains no musical information, but it will frequently have noise, in the form of groove damage and dirt. The Lyra Kleos Mono has therefore been designed to be completely insensitive to the vertical axis, which greatly improves the signal/noise ratio without any downside on monaural records.

The coil former is a square permeable plate oriented parallel to the record surface rather than the 45-degree angle used for most stereo cartridges, while the coils are wound so that they only generate a signal when there is horizontal movement of the stylus and cantilever when tracking a record.

Two totally separate monaural coils are used in the Lyra Kleos Mono, since most monaural cartridges are used with stereo amplifiers and stereo speakers. The separate coils also help avoid possible ground loops and hum problems that could otherwise be caused if a single coil is fed into a stereo two-channel amplification system, thereby tying the two channels together electrically.

The Lyra cartridges are special order.

 

Analogue - Cartridges
Type Medium weight, medium compliance, low-impedance moving coil cartridge
Cartridge Body One-piece machining from solid 7075 alloy billet, with reduced-surface higher-pressure headshell contact area, partially non-parallel shaping, phase-interference resonance-controlling mechanism, and body threaded directly for mounting screws
Stylus Type Lyra-designed long-footprint variable-radius line-contact nude diamond (3um x 70um), slot-mounted
Cantilever System Solid boron rod with short one-point wire suspension, directly mounted into cartridge body
Output Voltage 0.5mV@5cm/sec., zero to peak, 45 degrees
Frequency Range 10Hz ~ 50kHz
Tracking Force (Recommended) 1.65 ~ 1.75g (1.72g recommended)
Recommended Load Impedance MC phono input: 95.3ohm ~ 816ohm, Via step-up transformer: 5 ~ 15ohm
Compliance Approx. 12x10-6cm/dyne at 100Hz
Vertical Tracking Angle 20 degrees
Weight - Cartridge (without stylus cover): 8.8g

Sign up to our newsletter

Sign up today and receive offers and news all about our amazing products